The alloy is a general engineering alloy, has acid and alkali corrosion resistance in oxidation and reduction environment, high nickel composition makes the alloy has effective stress corrosion cracking resistance, widely used in a variety of industrial environment temperature not more than 550℃

Titanium is a very active metal with low equilibrium potential and high thermodynamic corrosion tendency in media. But in fact titanium in many media is very stable, such as titanium in oxidation, neutral and weak reducing media is corrosion resistant. This is because titanium and oxygen have a very large affinity, in the air or oxygen-containing medium, titanium surface generates a layer of dense, strong adhesion, inert oxide film, protect the titanium matrix from corrosion. They heal or regenerate quickly even due to mechanical wear. This indicates that titanium is a metal with a strong tendency to passivate. The oxide film of titanium always keeps this property when the temperature of the medium is below 315℃.

Gr9 titanium alloy is a low alloying near α titanium alloy, the nominal composition is Ti-3Al-2.5V, is used as cold processing pipe applications and developed, has good cold formability and welding properties, room temperature strength is 20%~50% higher than industrial pure titanium, has good corrosion resistance in many media. Gr9 has better welding performance and cold forming performance than TC4 alloy.

Titanium is a very active metal with low equilibrium potential and high thermodynamic corrosion tendency in media. But in fact titanium in many media is very stable, such as titanium in oxidation, neutral and weak reducing media is corrosion resistant. This is because titanium and oxygen have a very large affinity, in the air or oxygen-containing medium, titanium surface generates a layer of dense, strong adhesion, inert oxide film, protect the titanium matrix from corrosion. They heal or regenerate quickly even due to mechanical wear. This indicates that titanium is a metal with a strong tendency to passivate. The oxide film of titanium always keeps this property when the temperature of the medium is below 315℃.

The properties of Inconel601 alloy enable the material to be used in a wide range of applications, such as thermal processes, chemical processes, environmental protection, aviation and power generation. It is a standard result material used in various thermal process equipment. Industrial heating applications include baskets, trays and fixtures for annealing, carburizing, carburizing, nitriding and other heat treatment processes. In the industrial furnace, alloy is used to do radiation tube, maffo, heater, flame protector, wire annealing tube, braided wire conveyor belt, chain curtain, burner and electric holder with holding elements. Other service applications include thermocouple protection tubes, furnace atmosphere generators and infrared radiation screens.

Inconel alloy is a nickel-ferrochrome nickel-base corrosion resistant and heat resistant alloy, which has the following characteristics:
Good resistance to reduction, oxidation, nitriding medium corrosion performance at room temperature and high temperature has good resistance to stress corrosion cracking performance good resistance to drying chlorine and hydrogen chloride gas corrosion performance below 650°C has high strength, good molding, easy to weld; In air, the maximum operating temperature is 1175°C

Gr.2 is most widely used in chemical pressure vessels and seawater treatment applications.
Gr.2 exhibits superior corrosion resistance from high oxidation to low chloride environments. Continuous operation at 800°F and intermittent operation at 1000°F. Production process: Annealed at 1200-1450°F for 15 min to 2 h, air-cooled. Release pressure at 900-1100°F for 30 minutes. Titanium GR 1, 2, 3, and 4 cannot be strengthened by heat treatment.

GH1040 is a fe-Ni-Cr base solid solution strengthened deformation superalloy. Fe-base superalloy is a solution strengthened fe-base superalloy composed of nickel, molybdenum, chromium, nitrogen and other elements. The alloy has a high thermal strength index below 700℃, and the nickel content is about 26%. GH1040 superalloy alloy has good hot and cold working properties, and can reach high enough instantaneous strength when used for a short time at 990-1000℃. Good plasticity in hot working. The strength of the alloy can be improved by temperature processing.

Monel alloy 400 (N04400) is the largest amount, the most widely used, excellent comprehensive performance of corrosion resistant alloy. The alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated alkaline solution. At the same time, it is also resistant to neutral solution, water, sea water, atmosphere, organic compounds and other corrosion. An important feature of this alloy is that it generally does not produce stress corrosion cracking and has good cutting performance. Monel400 is more resistant to corrosion of reducing medium than pure nickel, and more resistant to corrosion of oxidizing medium than pure copper.